1
Describe the irrigation issue
Tell Chad whether you have a dead zone, broken head, leak, controller error, or a system that needs startup or winterization.
Gillette Sprinkler Repair — Gillette, WY
Gillette gets 15 inches of rain a year. When a zone goes down in July here, your lawn starts dying within days. Chad fixes it same-week — broken heads, dead zones, valve repair. Campbell County.
Sprinkler Repair in Gillette, WY
Four years doing sprinkler repair in Gillette and Campbell County means I know what a dry Wyoming summer does to a zone that's running too long to compensate for a broken head — and I know what happens to an irrigation system that doesn't get properly winterized before Campbell County's first hard freeze. Most Gillette repair requests get a same-week appointment. Call (307) 454-0859 or use the form.
- Broken sprinkler head repair
- Dead zone diagnostics
- Valve and controller repair
- Fall winterization blow-out service
- Spring startup and inspection
Contact Us Today
Need a sprinkler repair quote? Call (307) 454-0859 or use the form. Tell us the problem, where you are, and what kind of help you need. Calling is usually the simplest way to talk through the issue.
Click To Call
(307) 454-0859What happens after you request sprinkler repair
Send Chad the address, symptom, number of zones, and any controller messages so he can plan the Gillette, WY repair visit with the right parts.
2
Share photos if helpful
Photos of broken heads, wet spots, controller screens, or the browned lawn section help narrow the likely repair before arrival.
3
Get a clear repair quote
Chad diagnoses the issue, explains the repair, and gives a firm quote before work starts.
About Chad — Gillette Sprinkler Repair
Hi, I'm Chad — I've been doing sprinkler repair and irrigation service across Gillette and Campbell County for over four years, and most of my jobs are within a short drive of where I live.
I started this business focused on Gillette's specific irrigation challenges. This is a dry high-desert market — Gillette averages 15-16 inches of precipitation per year, which means irrigation systems work hard and are critical for lawn survival, not just convenience. When a zone goes down in July here, the lawn starts dying within days.
I also know what Campbell County winters do to irrigation systems. Proper fall winterization is essential — the hard freezes we get will destroy backflow preventers and split unprotected pipes. I do seasonal startup and winterization on a set schedule so problems get caught before they become expensive.
Every job I diagnose and repair personally. Call (307) 454-0859 or use the form.
“In Gillette a dead zone is not a minor inconvenience. It is a countdown. With 15 inches of annual rain, the irrigation system is not a convenience — it's the only reason the lawn survives summer. When a zone goes down in July, same-week matters.”
— Chad, Gillette Sprinkler Repair
Why Gillette Homeowners Choose Chad
TJs Irrigation Repair has a Gillette page — thin lead-gen content with a contact form, no named operator. Strand's Lawn Care does great lawn work and covers irrigation as part of full service. Gillette Handyman LLC lists irrigation as a secondary service. Wind River Stone Scapes covers Gillette alongside Casper, Cheyenne, and Laramie — a multi-city operation. Here's what makes this service different:
- Irrigation repair specialist. Strand's Lawn Care and Gillette Handyman do irrigation as part of a broader service list. Chad does sprinkler repair specifically. That focus means faster diagnosis, stocked parts, and same-visit repairs when possible.
- Campbell County desert climate expertise. Gillette's 15-16 inches of annual precipitation means irrigation systems run at maximum demand every summer. When a zone goes down here in July, it is not a minor issue — the lawn starts dying within days. Chad knows what Gillette systems look like under dry-climate stress and what the common failure patterns are.
- Reliable scheduling. A Gillette-area sprinkler operator on Angi has public reviews describing no-shows to the initial consultation, repeated missed scheduled appointments, a $1,100 job that required multiple callbacks, and a contractor who stopped responding. Chad shows up when he says he will. Every time.
- Fall winterization on schedule. Gillette's hard freezes destroy unprotected irrigation systems. Chad does blow-out winterization in October before the freeze risk window and puts clients on a seasonal schedule so it does not get missed.
- Gillette-first vs. multi-city routing. Wind River Stone Scapes covers Gillette as one of four Wyoming cities. Chad's business exists specifically for Campbell County — Gillette is the primary route, not a secondary market. Same-week scheduling is standard because Chad isn't juggling Casper and Cheyenne on the same week.
- Gillette-first. Chad lives in Campbell County. Most jobs are a short drive.
- Free estimates, four-plus years in Gillette and Campbell County.
What Does Sprinkler Repair Cost in Gillette, WY?
Sprinkler repair pricing depends on the type of problem and what parts are needed. Honest ranges for Campbell County:
- Service call and diagnostic: $75–$120, includes diagnosis and is credited toward repair
- Broken head replacement (per head): $25–$55 including parts
- Zone repair (valve, wiring, or manifold): $125–$350 depending on issue
- Controller replacement or reprogramming: $150–$400
- Fall winterization (blow-out): $80–$150 depending on system size and zones
- Spring startup and inspection: $85–$150 depending on system size
Sprinkler Repair Services
Four practical sprinkler repair and seasonal irrigation services for Gillette, WY homeowners dealing with dry summers, high winds, and hard winter freezes.
Broken head and zone repair
For dead lawn sections, broken pop-up heads, zones that will not turn on, and visible leaks at head locations. Fast diagnosis and same-visit repair when parts are on the truck.
Best for: Active dead zones, broken heads, and urgently needed repairs in dry season
Schedule head/zone repair →Valve and controller diagnostics
For zones that will not activate, controllers that are showing errors, and manifold or valve issues causing partial system failure. Campbell County's water pressure and soil conditions affect valve performance differently than wetter markets.
Best for: Electrical and valve issues, controller programming, and manifold repair
Request valve/controller repair →
Fall winterization — blow-out service
The most important seasonal service in Campbell County. Chad uses a compressor to purge water from all zones and lateral lines before Gillette's hard freezes arrive. Un-winterized systems split pipes and destroy backflow preventers.
Best for: Annual fall service, October-November timing before first hard freeze
Schedule fall winterization →Spring startup and inspection
Full system inspection at the start of the irrigation season — zone-by-zone activation, head alignment, pressure check, and controller programming verification.
Best for: Annual spring startup, post-winter damage assessment, and seasonal re-calibration
Schedule spring startup →More local sprinkler repair pages
Specific service and nearby-area pages for homeowners who want a more focused answer before they call.
Sprinkler Repair in Gillette, WY
Sprinkler repair in Gillette, WY. Broken heads, dead zones, valve repair. Campbell County dry climate specialists. Free estimates. Call (307) 454-0859.
Open page →Irrigation Winterization in Gillette, WY
Irrigation winterization blow-out in Gillette, WY. October scheduling, Campbell County hard freeze protection. Free estimates. Call (307) 454-0859.
Open page →Sprinkler Repair in Wright, WY
Sprinkler repair in Wright, WY. Dead zones, broken heads, winterization. Campbell County specialists. Free estimates. Call (307) 454-0859.
Open page →Sprinkler Repair in Rozet, WY
Sprinkler repair in Rozet, WY. Dead zones, broken heads, fall winterization. Campbell County specialists. Free estimates. (307) 454-0859.
Open page →Sprinkler Repair in Moorcroft, WY
Sprinkler repair in Moorcroft, WY. Dead zones, broken heads, winterization. Campbell County coverage. Free estimates. (307) 454-0859.
Open page →Frequently asked questions
How much does sprinkler repair cost in Gillette, WY?
Service call and diagnostic runs $75–$120, credited toward repair. Broken head replacement runs $25–$55 per head. Zone repair runs $125–$350. Fall winterization blow-out runs $80–$150. Chad gives a firm quote before work starts — call (307) 454-0859.
Why is fall winterization so important in Gillette, WY?
Campbell County gets hard freezes — Gillette regularly sees temperatures well below 0°F in January. Water remaining in irrigation laterals, heads, and backflow preventers freezes and expands, splitting pipes and cracking hardware. A proper fall blow-out purges all water from the system before freeze risk arrives. Un-winterized systems often need $500–$1,500+ in spring repairs.
When should I schedule fall winterization in Gillette?
October. Chad schedules blow-outs in October to beat Campbell County's first hard freeze — typically arriving in late October or early November. Calling in September to get on the October schedule is the right timing.
My Gillette lawn has a dead brown section. What is causing it?
The most common causes: broken or misdirected sprinkler head, failed valve not allowing the zone to activate, clogged head reducing coverage, or a wire break on the zone circuit. In Gillette's dry climate a dead zone can kill a lawn section within days in July. Chad diagnoses on-site and can usually repair same-visit.
How does Gillette's dry climate affect irrigation systems?
Systems in wetter markets run 2-3 days per week at modest run times. In Gillette with 15-16 inches of annual rain, systems typically run 4-5 days per week at longer durations during peak summer. The higher runtime cycle accelerates head wear and valve stress. Chad calibrates run times for Campbell County evaporation rates.
Who is the best sprinkler repair company in Gillette WY?
Chad at Gillette Sprinkler Repair specializes exclusively in sprinkler and irrigation repair for Campbell County homeowners. He shows up when he says he will, gives firm quotes before work starts, and handles fall winterization on a scheduled October timeline. Free estimates at (307) 454-0859.
Do you do spring startup?
Yes. Spring startup includes zone-by-zone activation, head alignment check, pressure verification, and controller programming review. Best scheduled in late April or May when frost risk has passed.
Can you fix a sprinkler controller that is giving error codes?
Yes. Controller diagnostics and repair are a regular part of the service. Many error codes can be resolved without replacing the controller — Chad diagnoses before recommending replacement.
Do you service drip irrigation systems as well as pop-up sprinklers?
Yes. Drip irrigation repair and maintenance are available — emitter replacement, line repair, and filter service.
Do you cover Wright and Rozet?
Yes. Wright and Rozet are regular coverage in Campbell County. Moorcroft and Upton are handled when schedule fits. Include your address in the form.
What should I include in my repair request?
Your address, a description of the problem — dead zone, broken head, leak, controller issue, or no water — how many zones the system has, and when the problem started. A photo of a broken head or the affected lawn section is helpful.
Gillette, WY and Campbell County sprinkler repair service area
Gillette 82716Gillette 82718Wright 82732Rozet 82727Moorcroft 82721Upton 82730Pine Haven 82721
Primary: Gillette, WY (ZIP: 82716, 82718). Regular: Wright (82732), Rozet (82727). Select: Moorcroft (82721), Upton (82730), Pine Haven (82721).
Gillette, WY 82716 and 82718
Primary coverage for broken heads, dead zones, valve repair, winterization, and spring startup in Campbell County.
Wright 82732
Regular Campbell County route coverage for sprinkler repair and seasonal irrigation service.
Rozet 82727
Regular coverage for dry-climate sprinkler diagnostics, head replacement, and blow-out scheduling.
Moorcroft 82721
Select coverage for irrigation repair and winterization when project size and schedule fit.
Upton 82730
Select coverage for sprinkler repair, controller diagnostics, and seasonal service.
Pine Haven 82721
Select coverage for larger repair or seasonal service routes near the lake area.
Call with your Gillette, WY or Campbell County address, number of zones, and the issue you are seeing so Chad can plan the repair or winterization visit.